Not only that, but due to the hardware configuration (Via 333MHz, 128MB RAM, etc) I have decided to focus on a miniature Linux system.

I dislike re-doing what someone else has done, unless I can do it noticeably better. I have decided to use DSL (Damn Small Linux) as my system of choice, with only minor changes to fit my needs:

Out of the “box”, I was unable to find network-boot DSL. Quickly searching their site, the version which seemed to fit was the initrd-only system. I downloaded it from this mirror, but you can find it as the dsl-x.x.x-initrd.iso file.

Extracting the initrd from the ISO file is quite simple:

mkdir /mnt/iso
mount -o loop dsl-x.x.x-initrd.iso /mnt/iso

And from here you can just copy the contents of the directory /mnt/iso/boot/isolinux/ selectively to your tftpboot directory.

So I got 50MB initrd which worked just fine. Changing this was quite a procedure, because in addition to the steps per the wiki hacking guide, I was required to extract the KNOPPIX file outside of the initrd, and repackage it when done. Quite messy, however, stand-alone as soon as the system has been able to boot.

An alternate I have decided to investigate into was of booting into nfs mount, aka, accessing the KNOPPIX iso disk through NFS and not through CDROM.

I was able to find some leads in DSL forums at this page, which lead to this guide. I was able to download pxe boot image from Knoppix themselves, however, it was based on an old kernel (2.4.20-XFS) which was part of Knoppix 3.3 (cannot find it anymore) and although reached the level of actually booting my nfs, didn’t include enough network drivers (I wanted pcnet32 to be able to “play” with VMware for the task), and was incompatible with my existing DSL.

I had opened the supplied Knoppix initrd, and replaced the modules version to the one supplied with DSL – 2.4.24, per the rest of the system. In addition, I have added my required modules, etc, and was able to boot successfully both on VMware and on the thin client hardware.

To replace the modules, one needs to follow these general-only guidelines (these are not exactly step-by-step instructions):

Mount through loop the DSL KNOPPIX image, for example, in /mnt/dsl
Uncompress the Knoppix PXE initrd
Mount through loop the uncompressed Knoppix PXE initrd, for example, in /mnt/initrd
cd to /mnt/initrd/modules
Replace all modules in the current tree with the ones supplied by DSL, obtainable from /mnt/dsl/lib/modules/2.4.26 directory tree, including the cloop.o module
Umount the initrd image
Compress the initrd image
Boot using DSL linux and the new initrd image.

In order to boot successfully, you need to supply the pxe boot these two instructions:

nfsdir=nfs-server:/path/to/KNOPPIX directory

(since I was quite unsure about the letter case required, I have created a symlink from lower-case to upper case, so I had a link /mnt/KNOPPIX to a directory /mnt/knoppix, and inside this directory, a file called knoppix and a symbolic link to this file KNOPPIX. In my case, the exported path was /mnt/ only. Notice this one!).

BOOT_IMAGE=KNOPPIX – but you can have different KNOPPIX images for different purposes.

Finally it has worked correctly. Changes can be done only to the KNOPPIX iso image, per the hacking guide.

This is my PXE-enabled initrd, based on the text above, which fits DSL-3.4.1: minirt24.gz

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.